CR Calibration Fluid
$15.95
Out of stock
Notify me when this item is back in stock.
The MD calibration fluid is to be used exclusively in MD injector testing equipment. Sold in convenient one quart bottles.
We do not manufacture this fluid, we repackage it into smaller quantities for distribution.
Calibration fluid for diesel injectors
MD Calibration Fluid is a low viscosity test fluid for the calibration of Diesel injection pumps with a very close viscosity tolerance. It is noted for its excellent wear-, corrosion-protection and low foaming tendency. The product is also suitable for use as corrosion protection oil for the internal preservation or conservation of fuel systems from MTU.
Application Notes
MD Calibration Fluid is used as a test fluid for the calibration of Diesel injection pumps from Bosch (VS 15665-OL), MTU, MAN and Volkswagen. The product is also suitable for use as corrosion preventive oil for the internal preservation or conservation of fuel systems from MTU.
Quality Classifications
Practice and tested in aggregates with filling
Bosch Norm VS 15665-OL – CV, ISO-Norm 4113-CV-AW, MAN, Volkswagen, Lucas CAV, MB DBL 6513
Characteristic
MD Calibration Fluid offers:
- Excellent wear protection
- Excellent corrosion protection
- Low tendency to foam
| Weight | 2 lbs |
|---|---|
| Dimensions | 4.2 × 2.6 × 9.8 in |
Related products
The maladies of a mechanical compression testing tool. Oh the effort of writing down those numbers, and cranking the engine while you are unable to see whether or not the needle on the gauge is moving. I have also found myself getting to the last cylinder, then realizing I may have inadvertently written down the [...]
Tools
M14 x 1.5 threaded cap to close port on rail, to eliminate injector connection to the common fuel rail.
Tools
Designed to install HP seals into the injector, prior to replacing the control valve. This tool is engineered to safely and quickly install seals in Bosch 120 series injectors that are CRIN3 designated.
Tools
Common rail high pressure metal line. 0.315″ OD x 0.120″ ID M14 x 1.5 swivel nuts both ends 1 90° bend on one end Primarily used for testing purposes, but these can also be used for custom applications. These can be bent with a Rigid or Eastman type HD bender for 5/16″ tubing.